The Screen Door Adapter is available in two versions:
1. Base model for $111 (requires cutting with a hacksaw)
2. Adjustable Adapter (Patent Pending) (no cutting) is $141
Please note a flat Australia-wide shipping fee is not possible for the pet doors because they are over 1.2m long and thus incur manual handling and over-size item fees in addition to the actual freight charges and domestic delivery surcharges and fuel levy surcharges, etc. Most couriers including Australia Post can not be used due to the over 1.2m issue.
So, in order to streamline checkout for most, there are a few common zones to choose from at checkout that cover most of the highly populated areas along the east coast and Perth metro.
If you live in more rural areas then please select the first option for $1. We will then email you an invoice based on our cost to your address depending on the courier used.
If you prefer, you can email before ordering for a freight quote.
Unfortunately, we have to use multiple couriers depending on location and warehouse origin so it is not possible to use an accurate freight calculator at checkout. The zone model is the best system we can come up with thus far to cover most of the populated areas.
**The Pet door is NOT included- the universal door frame ('screen door adapter') is a channel section that fits in to the side of our pet door.
See how the Universal Door frame section works on our pet door by clicking on the video below: your FREEDOM awaits!
Please note, the pet door is NOT included. The adapter is the aluminium door frame section that screws on to the SIDE of the pet door - refer photo below
Our Universal Door frame (Screen Door Adapter) fits our Pet Door Inserts. It is a universal aluminium door frame section 100mm wide x 15mm deep x 2120mm long (base model) or Height Adjustable (1950-2110mm), which mirrors your own sliding door frame (i.e., door jamb) so BOTH your sliding glass door and screen door can close and lock in to the pet door system. Easy solution and simple design.
So, when you want to have air flow in/out of the house, you can open your sliding glass door and keep your screen door closed against the pet door without letting mosquitos/flies/weather inside the house.
The Screen Door Adapter also enhances security as the leading edge of the sliding door is not exposed, which makes it more pry proof. Note if you do not buy the Adapter, the sliding door will just butt up against the pet door and there will often be gaps which could encourage prying.
The Adapter also hides the gaps which looks a lot better (ie., if it is in your living area it will look much nicer with the adapter) and it enhances bug and weather proofing.
What are the benefits of fitting the Universal Door Frame up the side of the pet door?
ü Air flow
ü Insect proofing
BUY NOW by CLICKING
on the model you prefer at checkout
If you have not seen the video and info yet on the PatioLockTM (patent pending) model, then maybe have a look on the home page as this is the only Patio Pet Door that can lock the glass door to the pet door without screwing, drilling, and so on. Super convenient and easy to quickly lock the glass door to the pet door. The security and features are enhanced with the Screen Door Adapter.
Please note all our Base Model Patio Pet Doors come with a bracket that allows the pet door to be fixed in to the wall frame. The top panel of the pet door also has a screw hole so you can screw the top of the pet door up in to the top track inside the top for extra strength. You can then transfer both your sliding door lock and screen door locks directly on to the universal door frame accessory as the pet door will be securely screwed in to your door frame (Note most locks will transfer- refer notes below in red for more info).
It is highly recommended to invest in the PatioLockTM (patent pending) model because it not only locks without screwing and drilling but you can also re-use the entire system at the next property. You may need to buy the two-hook lockset or vice versa if the next house has a different lock but then you will be able to lock to almost all standard height range sliding doors without screwing and cutting again!
it is possible to screw the pet door in to the wall underneath the lock hub that mounts on to the wall frame (using tech screws provided). Then you can transfer your locks acorss. When you leave the property, you can take the hub off the pet door and screw it back on the wallframe so that it covers the two 3mm holes that you used to fix the pet door to the wall frame. Or you can just use a simply piece of rod/dowell cut to length and put in th track behind the sliding glass door OR you can put a window clamp on the top rear of the sliding door frame to prevent it from sliding back.
Fitting the Universal Door Frame Accssory:
The universal door frame has been made to be compression fit up the side of the pet door and is secured to the pet door via 3 self drilling screws (screws provided). Note the universal door framer is approximately 2120mm long and needs to be cut to length with a hack saw (or compound saw if you are lucky!) so that it fits between your top and bottom tracks. Thus the tools needed to install the adapter include: a hack saw, tape measure and a drill-driver. A weather seal comes with every adapter if your door is a bit out of sqaure.
Freight:*Free Delivery includes: most of SA, VIC, NSW, ACT + Metro Perth & Brisbane. Small courier 'gap' payments to regional areas & to NT, TAS, WA & Qld.
How long will it take for my adapter to be despatched?
We aim to get your adapter out within 1 business day of payment clearing.
Insurance is included with every delivery and is incorporated in to the courier rates.
Returns are accepted if there is a fault with the product including freight. We can offer this without hesitation because we make a great product and do not tend to get complaints.
Please take the time to measure your pet, your sliding door opening space and your lock type to ensure you order the correct size and product. Due to the size, weight and nature of a glass product, returns get expensive due to overall courier costs and warehouse fees (for unopened products). If you have opened your door/adapter then please contact us to discuss options.
IMPORTANT: Please note all deliveries will have default instructions for the courier to leave the pet door at your front door.
All deliveries are Road Express, which works on a Monday-Friday basis. Delivery time varies according to location. For example, it is usually 3-4 business days delivery from Adelaide to Sydney.
The courier cannot deliver to a post office box; it must be an actual address.
You can order your Screen Door Adapter NOW
BY CLICKING ON THE ITEM AT THE TOP OF THE PAGE!
We make tough cyclone-rated Pet Door Inserts to suit the harsh Australian environment and thus can easily back our product 100%.
Our pet doors and accessories are over-engineered to ensure a very long warranty can be offered to you for your peace of mind.
Have not put the adapter on yet for the security door but put door in it is so fantastic dogs go though easy and my wife loves it she said it is if it is part of the door i would highly recommend this door and if not sure do what i did ring and ask about it they guy i spoke to was wonderful and helped heaps
Very easy to fit and looks and works very well.
The screen door adapter is fantastic. I am kicking myself that I didnt order it 7 years ago when I got the original dog door from this same company.
This attachment is just what is needed to stop flys, mice etc
Excellent product. Provides a professional finish to the pet door installation.
Very good product and works very well :)